FSR400 Series

Intelligent force sensing

Interlink Electronics
FSR_X_profileFSR_XExif_JPEG_PICTUREExif_JPEG_PICTUREExif_JPEG_PICTUREExif_JPEG_PICTUREExif_JPEG_PICTUREExif_JPEG_PICTUREExif_JPEG_PICTUREExif_JPEG_PICTURE

Force and Position Sensors

The FSR series consists of ultra-thin Force Sensing Resistor® sensors designed for precise force and position detection. Based on mature thick-film polymer technology, FSR sensors provide resistance variation proportional to applied force, enabling simple and cost-efficient electronic integration.

Durable, vibration-insensitive and immune to EMI/ESD, FSR technology is ideal for advanced HMI systems, robotics, medical devices and industrial instrumentation.

Functional advantages

📏 Thickness 0.20 to 0.75 mm
🎯 Measuring range 0.2 to 20 N
♾️ Lifetime +10 million cycles
⚡ Power consumption ≤ 1 mA / cm²
🧱 Insensitive to vibration & EMI

Information request

Identify the right products for your application and send us your request in just a few clicks.

Select the series, specify your volume requirements or technical constraints, and let us guide you.
Our teams will analyze your needs and get back to you quickly with a clear proposal: availability, lead times, pricing terms, and technical recommendations if necessary.

Les FSR (Force Sensing Resistor®) sont constitués de deux feuilles polymères laminées, dont l’une comporte un réseau d’électrodes intercalées et l’autre un matériau semi-conducteur exclusif. Lorsqu’une force est appliquée, la résistance diminue de manière proportionnelle, offrant une plage dynamique d’environ 1 kΩ à 10 MΩ.

This wide impedance range allows extremely simple interface electronics, delivering an outstanding performance-to-cost ratio compared to capacitive or piezoelectric technologies.

Main technical specifications

  • Standard thickness: 0.35 mm

  • Possible thickness: 0.20 to 0.75 mm

  • Measurement range: 0.2 to 20 Newtons

  • Travel: 0.05 mm

  • Service life: + 10,000,000 cycles

  • Nominal resistance (unloaded/saturated): +1 MΩ to less than 3 kΩ

  • Maximum current consumption: 1 mA / cm².

  • Standby time: – 3 ms

  • Operating temperature: -30 °C to +170 °C

  • Substrate: high-temperature polyetherimide thermoplastic resin

  • Does not generate EMI, insensitive to ESD


Options – shapes, families and connections

Available shapes :

  • Round Ø 5.08 mm (FSR400)

  • Round Ø 12.70 mm (FSR402)

  • Square 39.6 mm (FSR406)

  • 622.3 × 15.2 mm snap-off strip (FSR408)

Configurations :

  • Long or short tail

  • No Contact

  • AMP female pods

  • AMP connector

  • Solder Terminals

Available architectures :

  • Elementary FSR and simple matrices

  • Linear potentiometer (force + multiplexed position, resolution up to 0.05 mm)

  • XYZ trackpad (2D force/position measurement)

  • Multipoint matrix array (pixels ≥ 5 mm)

Customization possible according to specific application (typical development cycle 6 to 12 weeks).


Markets & use cases

  • Robotics (robotic fingers, pressure sensors)

  • Biomechanical analysis and approach

  • Sensitive touch interfaces

  • Medical and instrumentation

  • Music & audio

  • Advanced industrial HMI

FSR technology is a robust, slim and adaptable solution for applications requiring reliable force measurement with simplified integration.

Electrical data
Technology
Resistive
Number of functions
1
Max. current
Rated insulation voltage
Initial Contact Resistance
Insulation resistance
Dielectric strength
Electrical Life
10 000 000 Cycles
Contact Type
Available lighting types
N/A
LED colors available
Content
LED power supplies
N/A
Mechanical characteristics
Installation diameter
N/A
Action
Max Actuation force
0,20-20 N
Mechanical lifecycle
10 000 000 Cycles
Travel
0,05 mm
Fastening / Mounting
N/A
Body Material
Plastic
Button material
Plastic
Forme Touche
N/A
Termination / Connection
Solder Terminals, PCB Pins, Connector
Environmental Features
Operating Temperature
-30°C~+170°C
Ingress Protection
IP40
Impact Resistance
IK10

Customization options with U.DESIGN

c-UL-US
CE
ReaCH
RoHS

Other Linked Downloads

Aucun document disponible.